Americas

United States United States
Canada Canada
Mexico Mexico
Brazil Brazil

Europe

United Kingdom United Kingdom
Germany Germany
Italy Italy
France France
Switzerland Switzerland
Spain Spain
Sweden Sweden
Russia Russia

Asia Pacific

Australia Australia
China China
Hong Kong Hong Kong
Japan Japan
Singapore Singapore
Taiwan Taiwan
South Korea South Korea
India India
close
Search:
 
Misfit Shine 2

Welcome, Misfit.

Misfit Shine 2

Download Quickstart Guide

iOS 8 and above (iPhone 4S/5/5C/5S/6/6 Plus, iPod Touch 5th Gen and above, iPad 3/4/Air/Mini)

BLE (Bluetooth Low Energy) ready Android devices running software 4.3 and above (Samsung Galaxy S4/S5/S6, Samsung Note 3/4/5 and the Google Nexus 4/5/6)

For Misfit App compatibility Click Here

WHAT’S INCLUDED

  1. Shine 2 Fitness and Sleep Monitor
  2. CR2032 battery (pre-installed)
  3. Sport Band
  4. Clasp
  5. Action Clip
  6. Battery Door Tool

HOW TO REPLACE THE BATTERY IN SHINE 2

Shine 2 is powered by a 3 Volt CR2032 coin cell battery (included). Only replace the battery in the Shine 2 with a CR2032 battery type. It lasts about 4 to 6 months with normal use. We recommend using the same brand (or one with equivalent quality), which should give you the estimated battery life.

Sync your Shine 2 to the Misfit App. In the app, tap “Devices” to see a list of your devices. Each device listed will display a battery icon, indicating the estimated remaining battery power.

1. Twist open the shine 2 body using the Battery Door Tool

Place Shine 2 in your palm with the back facing up towards you. Connect the Battery Door Tool to the back, battery door, of the Shine 2. Press down firmly and rotate the Battery Door Tool to the left. If you do not have a Battery Door Tool, please refer to the section below “How to Open Shine 2 Without a Battery Door Tool”.

2. Remove the shine 2 battery door

3. Remove the used battery

Remove the used battery and properly dispose of the used battery. [Refer to SAFETY WARNINGS]

4. Place a new CR2032 battery in the Shine 2

The positive (+) side of the battery faces down into the Shine 2 and the negative (-) faces outwards. The negative (-) face of the battery should be visible when placed into the Shine 2.

5. Place the battery door back onto the Shine 2

Place Shine 2 in your palm and put the battery door onto the back of the Shine 2. Make sure the indent above the Misfit logo on the battery door aligns with the small silver screw inside the Shine 2.

6. Close the Shine 2 body using the Battery Door Tool

Connect the Battery Door Tool to the back, battery door, of the Shine 2. Press down firmly and rotate the Battery Door Tool to the right until the battery door will not rotate anymore. The Shine 2 will vibrate when closed. If you do not have a Battery Door Tool, please refer to the section below “How to Close Shine 2 Without a Battery Door Tool”.

HOW TO OPEN SHINE 2 WITHOUT A BATTERY DOOR TOOL

Place Shine 2 in your palm with the back facing up towards you. Place your other palm over the back of the Shine 2, making good contact with both sides of the Shine 2. Press Shine 2 firmly in-between your palms and rotate to the left. You should feel the battery door twist to the left. If the battery door doesn’t automatically pop off, then separate the battery door from the back of the Shine 2.

HOW TO CLOSE SHINE 2 WITHOUT A BATTERY DOOR TOOL

Place Shine 2 in your palm and put the battery door onto the back of the Shine 2. Make sure the indent above the Misfit logo on the battery door aligns with the small silver screw inside the Shine 2. Place your other palm over the back of the Shine 2, making good contact with both sides of the Shine 2. Press Shine 2 firmly in-between your palms and rotate to the right until the battery door will not rotate anymore. The Shine 2 will vibrate when closed.

BEST PRACTICES TO MAXIMISE SHINE 2’S BATTERY LIFE:

Keep the app up to date Keep Shine 2 device’s firmware up to date Resist unnecessary tapping of Shine 2 as a party trick

CR2032 battery info: 3V Li-MnO2 225mAh

USING THE MISIT APP FOR THE FIRST-TIME:

1. Signing up with the App

Download the Misfit App from the App Store or Google Play and install the Misfit App on your device.

    

Tip: Search for “Misfit” in the App Store.

Open the app and follow the instructions on screen to create an account for new users or log in if you already have one. You will be asked to input information about yourself so we can provide you with the best experience and most accurate data. This information is confidential. Refer to our Privacy Policy in ‘Settings’ in the app for more information.

2. Linking your Shine 2 for the first-time

You will be prompted to link Shine 2 for the first-time. In the app, initiate the linking process to allow the device to search for the Shine 2’s Bluetooth signal. When linking begins, the LED lights on the Shine 2 should light up.



IF YOU ALREADY HAVE THE MISFIT APP INSTALLED:


1. Open the Misfit App

If you already have installed and used the Misfit App, then simply open the Misfit App.

2. Tap “Devices”.

“Devices” is located at the bottom of the App.

3. Tap the “+” at the top of the Devices screen

4. Linking your Shine 2 for the first-time

You will be prompted to link Shine 2 for the first-time. In the app, initiate the linking process to allow the device to search for the Shine 2’s Bluetooth signal. When linking begins, the LED lights on the Shine 2 should light up.

WATER RESISTANCE

Shine 2 is water resistant up to 5 ATM (50 metres). Suitable for dish-washing, splashing and swimming in shallow waters, not snorkelling or diving.

To maintain water resistance:

  • Install the back cover (battery door) correctly
  • Do not tamper with the back cover (battery door) when it is still submerged in liquid
  • Avoid prolonged exposure to salt water or other chemicals, e.g. detergent, chlorine
  • Avoid moving Shine 2 in and out of contrasting extreme atmospheres; saunas, steam rooms, hot tubs and hot showers could distort the sealing gasket
  • Avoid opening the back cover (battery door) unnecessarily
  • When opening the back cover (battery door) to replace the battery, avoid touching the gasket
  • Never leave Shine 2 open for more than a few hours; a dry gasket will cause the seal to fail

ENVIRONMENTAL CONDITIONS

Operating temperature: -4° to 113° F (-20° to 45° C)
Non-operating temperature: -22° to 140° F (-30° to 60° C)

HOW TO USE THE SPORT BAND & CLASP

Clasp:

1. The indent above the Misfit logo (on the back of the Shine 2) represents the 12:00 light on the face of the Shine 2.
2. Angle the bottom edge of the Shine 2 in the clasp.
3. Snap the top edge of the Shine 2 into the clasp.

4. The clasp can be clipped to your clothing or use the loop on your keychain.

Sport band:

1. Orient the two protruding ends of the action clip to the two small holes of the sport band.
2. Position the action clip behind the sport band.
3. Insert the bottom end of the action clip into the bottom small hole of the sport band.

4. Place the Shine 2 into the action clip. The indent above the Misfit logo (on the back of the Shine 2) represents the 12:00 light on the face of the Shine 2.
5. Touch Shine 2 to show the 12:00 light is in the correct position.
6. Stretch the sport band over the Shine 2 and insert the top end of the action clip into the top small hole of the sport band.

7. Roll the large opening of the sport band to fit around the circular edge of the Shine 2.
8. Wrap the sport band around your wrist and pull the button-end through the loop of the sport band.

9. Pull the button end of the sport band to a comfortable fit around your wrist.
10. Snap the button into the small circular holes along the sport band

MEMORY

Shine 2 holds up to 30 days of your activity data. Sync Shine 2 regularly to ensure the most detailed data has been downloaded onto the app. Shine 2 begins recording data for each day at midnight, when it’s display resets. Information from the previous day is stored in it’s memory and will be transferred to the app at the next sync.

WHAT ARE POINTS?

Points are a way to measure physical activity, both from steps and other activities. For example, if you walk for 10 minutes, you can earn about 100 points, depending on your pace. If you run for 10 minutes, you can earn closer to 3-5 times that amount, depending on the intensity of your running. The more active you are, the more points you receive. It’s that simple.

CALORIES

Shine 2 displays your total calories burned, which includes:

1. Calories related to your physical activities like walking, running, swimming, etc.

2. The basal metabolic rate (BMR) of energy needed just to keep your body alive. Even if you have not performed a lot of activity in a day, you will still burn calories related to your BMR, which can be a surprisingly large number - more than 1,500 calories for many users. Shine 2’s calorie estimate is based on the most updated medical research on energy expenditure.

SLEEP

If you wear Shine 2 to sleep, it can automatically track: - When you fell asleep - Duration of sleep - Duration of light and restful sleep - When you woke up

VIEW YOUR PROGRESS AND THE TIME

Tap once or twice:

Tap Shine 2 with one or two fingers to check progress toward your daily activity goal.

  • 25% Progress
  • 50% Progress
  • 100% Progress
  • 125% Progress
  • 150% Progress
  • 200% Progress
  • 225% Progress
  • 250% Progress
  • 300% Progress

Telling time:

You can enable the clock feature in the Misfit App. Choose to display it before or after your activity progress when you tap Shine 2. The time is synchronised with the time on your mobile device.

TAGGING ACTIVITIES

The activity tags can be edited in the Misfit app. 1. Sync your Shine 2 2. Under “Home” scroll through the day’s STORY to find the activity you want to tag. 3. Tap on that activities “EDIT” button. 4. Choose the correct activity from the list.